![]() ![]() ![]() The drawing can also show neighboring structures and streets if they are relevant to the building design. Site plans show an aerial view of the whole building or group of buildings within its neighboring context, with clear boundaries and access points. We have a whole article here, dedicated to drawing one. There are many types of architectural drawings that are required during the process of designing, developing, and constructing a building, some are used at specific times and stages, and others such as the floor and site plans are continuously evolved and adapted as the project develops.Īt their simplest level, architectural drawings ideally comprise of floor plans, sections, sizes and units of measurements, together with references and annotations, however there many additional drawings required depending the scope and complexity of the building.Ī floor plan is essentially a map showing a buildings internal arrangement in relation to its external walls and environment.Įach floor or level of the building will require its own plan, which as a rule of thumb is a horizontal slice taken across the building at 1200mm above its floor level. The 3D visualization of the reinforcement is available in the GSE Concrete software.Learn More Standard architectural drawings With the automated slab generation and design tools in the GSE, the longitudinal reinforcement required to withstand bending forces is calculated according to the design parameters defined by the user. The GSE Concrete supports several concrete design standards. ![]() The foundation can be supported by either: ground springs, regular springs, fixed supports, piles or imposed displacements allowing flexible modeling for users. The function in the GSE Concrete automatically calculates the nodal tributary areas to save users’ time. This data makes it possible to verify the sizing of the foundations by ensuring that the bearing capacity of the soil is not exceeded. According to the deflection, the stiffness and the tributary area calculated for each of the nodes, the exerted pressure of the slab on the ground is calculated. While considering the various load combinations, the nodal displacements of the slab on the ground make it possible to check the stability and deflections of the structure. The analysis of the model allows to calculate several important parameters for the design of the foundation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |